If you prefer using the smartphone or tablet for GPS directions, then you need to get a universal car phone clip holder. These holders allow you to use the phone in any position for safe and convenient driving. Furthermore, they mount strongly to withstand harsh shaking on bad roads. Also, installing it takes less than 60 seconds. Most of them have soft padding to prevent the phone from scratches. On top of that, these car phone clip holders work with different types of phones and small devices.
Nevertheless, you can find so many models of this universal car phone clip holder, but it is difficult to understand which one is the best. So, we have highlighted some factors below that will guide you as you make your choice. Pick the phone holder that will satisfy all your demands from this list below.
List of 10 Best Universal Car Phone Clip Holders in 2023
#10. TORRAS Universal Car Phone Clip Holder
The Torras universal car phone clip holder is ideal for giving the phone security. It has curvilinear design clamps for safe clamping of the phone. Furthermore, it is compatible with many phone cases, thick or slim. Then again, it fits all smartphones. It is easy to adjust its base no matter the type of phone.
This holder maintains the position of the phone. Most importantly, it features a strong vent clip. As a result, the phone will never fall down or pop up. Last but not least, it weighs 4.3 pounds. After buying this phone holder, you will enjoy 18 months warranty.
- It weighs 4.3 pounds
- Curvilinear clamps for safety
- Easy to adjust the base
- Strong vent clip to prevent the phone from falling
- Compatible with all phones
- 18 months warranty
#9. VICSEED 2020 Upgrade Universal Car Phone Clip Holder
This universal car phone clip holder by VICSEED has a unique design. First and foremost, it is constructed from durable aviation-grade materials. So, it is resistant to rust and abrasion. The upgraded clamps ensure easy opening and closing without breaking. Also, it has an intelligent design that allows you to access the phone charging port. Being stable, it maintains the position of the phone. The foot and arms of the clamp feature a soft silicone pad for stability. It quickly switches between landscape and portrait view.
Equally important, it ensures stability and safety as you drive. Amazingly, it fits all air vents. Additionally, it features an adjustable foot to fit different phones. More specifically, it fits most iPhones. No tools are needed to install his phone holder. Therefore, it is easy to install. To save time, you can operate it using one hand. Lastly, it features a warranty for 365 days.
- Adjustable foot to fit different phones
- Aviation-grade materials for longevity
- Resistant to rust and abrasion
- Stable to maintain the phone’s position
- Quick to switch between landscape and portrait modes
- It fits most iPhones
- Easy tool-free installation
- Warranty for 365 days
#8. Touhuhot [2020 Newest] Universal Car Phone Clip Holder
The Touhuhot car phone holder has a compact design. Moreover, it works even in harsh environments. Amazingly it can stand continuous shaking for 12 years without falling off. Next, it is constructed from silicone and steel for durability. It is ideal for trucks, home cars, sports cars, special cars, and sports utility vehicles.
Uniquely, it features 360 degrees rotation for convenience. This means that it allows you to use the phone in vertical or horizontal mode. The joint does not get loose. Further, it has three tight settings. So, it holds the phone firmly and securely without scratching it. Not to forget, it weighs 4.8 ounces. Finally, it has a lifetime warranty.
- Weighs 4.8 ounces
- A compact design
- Strong to stand 12 years of continuous shaking
- Three tightness settings
- 360 degrees rotation for convenience
- Compatible with all cars
- Does not scratch the phone
- Lifetime warranty included
#7. Cutier Universal Car Phone Clip Holders
The Cutier universal car phone holder is perfect for different types of phones. It allows for 360 degrees rotation. This means that you can view the phone in different directions. For safety, when driving, it features the HUD simulating design. So, you will not look down when driving. This feature enhances safety. Moreover, it is simple to remove and install. This is because its base is curved. You can use a single hand to pick the phone.
Having a quick-release button, it is convenient to operate. Most importantly, it features a non-slip silicone pad for the safety of the phone. On top of that, it matches with most phones. This is because its width measures 3.3 inches. The overall size measures 110 by 80mm. In conclusion, it weighs 88g.
- It weighs 88g
- Overall size of110 by 80mm
- HUD simulating design for safe driving
- 3 inches width to match different phones
- 360 degrees rotation for easy access to the phone
- Simple to remove and install
- Quick-release button for convenient operation
- A non-slip silicone pad
- Made of ABS and Silicone
#6. Miracase 2020 Upgraded Universal Car Phone Clip Holder
This universal car phone clip holder by Miracase Store features a fall-proof locking design for holding the phone. The clip hook catches one air vent blade. Further, it features stable trapezoid structure clamps. Also, it has a thick rubber and shockproof sponge. As a result, it holds the phone strongly. With universal compatibility, this phone holder features a universal mount for wide compatibility with electronic devices and phones.
In addition to that, this holder features a 360 degrees viewing angle. The head rotates to offer a perfect viewing angle to ensure safety when driving. Another important feature of this phone holder is that it allows for single-handed operation. The air vent makes it easy to remove or insert the phone. Besides, it weighs 3.98 ounces. Finally, it has a one-year warranty.
- It weighs 3.98 ounces
- Air vent for easy removal and insertion of the phone
- Fall-proof locking design
- Trapezoid structure clamps for added stability
- Adjustable 360 degrees viewing angle
- Easy to operate with one hand
- Warranty for one year
#5. LISEN Upgraded Universal Car Phone Clip Holders
The LISEN universal car phone clip holder matches heritable air vents only. It is hook-shaped and has 3 points for grasping. So, it ensures that the phone is safe from falling. Uniquely, it has six inbuilt magnets with a maximum weight capacity of 4 cellphones. So, it has a powerful suction that keeps the phone stable even if the road has bumps.
Next, it features simple installation. This is because it involves a short procedure. For added stability, you need to use a square pad behind the phone or case. Most importantly, it holds the most Mini tablets and smartphones. On top of that, it weighs 1.75 pounds only.
- Bears the weight of four cellphones
- It weighs 1.75 pounds
- Hook shaped with three grasping points
- Powerful suction for stability
- Simple installation procedure
- Matches most mini tablets and smartphones
#4. Mpow 3-Level Adjustable Universal Car Phone Clip Holder
This phone holder from the Mpow Store has upgraded sidearms for stability. Also, these sidearms have sponge pads for preventing the device from scratches and falling. The air vent is constructed from PC material. Likewise, it has an inbuilt manganese steel plate to offer a powerful clamping performance. The extended vent clip stays intact, no matter the conditions on the road. Furthermore, the vent clips adjust at 3 levels to offer three tightness. Therefore, it fits most horizontal and vertical vent louvers.
In like manner, you can remove or insert the phone holder by adjusting the gear. The width of the holder can expand to 95mm to fit most phone sizes. Additionally, it can support up to 13mm thick phone cases. Equally important, it rotates to increase the viewing angle. The back of this holder features a quick-release button for one-handed operation.
- Vent clips with 3 level tightness adjustments
- Expandable holder to fit 95mm wide phones
- It supports 13mm phone cases
- Upgraded sidearms for stability
- Quick-release button to allow for one-handed operation
- Sponge pads for preventing scratches and falling
- Rotatable design to improve the viewing angle
- Easy tool-free installation
#3. Miracase Universal Car Phone Clip Holders
This universal car phone clip holder from Miracase Store locks the phone safety and prevents it from falling. It catches one car air vent blade. The tightening nut and the clip plate ensure absolute fixation. So, it will never fall even on bumpy roads. Most importantly, it works with all cellphones with a width of 2.1 to 4.05 inches.
Next, it features a one-handed operation. The adjustable clamp arms and quick release button allow for one-handed operation. So, you can easily remove or insert the phone. On the other hand, it is safe to use when driving. Its head rotates at a 360 degrees angle for safety. So, you can operate the phone in vertical or horizontal mode. This holder weighs 4.8 ounces. To finish, it features a one-year warranty.
- Weighs8 ounces
- Fits all cellphones with 1 to 4.05 inches widths
- One-handed operation for safe driving
- 360 degrees rotation for convenient operation
- It never falls on bumpy roads
- Easy to install
- Warranty for one year
#2. Mongoora Updated Version Universal Car Phone Clip Holder
Next on the list, we have this universal car phone clip holder by Mongoora. To begin with, it features easy operation using one hand. In like manner, it is easy to mount on the air vent. After installation, it will never fall. The process of installation takes only one minute to save your time. Secondly, it has a metal tightening nut and thread for absolute fixation.
The silicone finish surface ensures a firm grip. Thirdly, it works with all smartphones. These include the Samsung Galaxy, iPhone, Motorola, and more. Fourthly, it features 360 degrees rotation to offer perfect viewing angles. As a result, it ensures safety when driving. Finally, it weighs 5 ounces.
- Weighs 5 ounces
- Easy to operate with one hand
- Easy air vent mounting
- 360 degrees rotation for perfect viewing angles
- Quick tool-free installation
- Metal tightening nut and thread for absolute fixation
#1. Lamicall Universal Car Phone Clip Holder
The Lamicall universal car phone clip holder features wider compatibility. This implies that it fits smartphones with different widths ranging between 4.7 and 6.5 inches. Next, it features two unique grips. Furthermore, it clips behind to make sure that it does not fall suddenly. Since the grips are two, it is more stable. Again, this holder ensures that the phone does not fall even if the road has many bumps.
Additionally, it allows you to remove and insert the phone using one hand. Besides, it has rubber cushions and soft padding to protect the air vent and phone from scratches. You can use this holder during long trips, especially if you are using GPS. On the other hand, you can carry it around since it is pocket-sized. Having adjustable angles, you can set the phone horizontally or vertically. In conclusion, it Weighs 3.2 ounces.
- It weighs 3.2 ounces
- Adjustable angles for setting the phone horizontally or vertically
- Fits 4.7 – 6.5 inches wide phones
- Firm grips for stability
- Easy one-handed operation
- Perfect for use on long trips
- Pocket-sized for easy carriage
Universal Car Phone Clip Holders Buying Guide
Multiple Mounts: Most car phone holders have one cradle and more than 1 mount. In case you own two or more vehicles, you can install 1 mount in each car and then carry the cradle with you. Nevertheless, you should buy a holder that has several mounts.
Power: When buying a universal car phone clip holder, ensure that it is easy to mount on a 12 volts plug so that you use it for charging the phone or any other small device.
Magnets: To secure your phone mount conveniently, make sure that the holder you buy uses strong magnets. Apart from security, it allows for easy snapping and removal of the phone without affecting the clasps and springs.
Rotation: The best universal car phone clip holders feature 360 degrees rotation. This allows for convenient phone use while driving. More specifically, you can use the phone in vertical or horizontal mode.
This article clearly outlines the distinctive features of the universal car phone clip holders available today. If you need one, you should not have a hard time choosing. Just consider the features and advantages, and for sure, you will find the one that is perfect for you. Nevertheless, you need to ensure that it lasts longer. Also, it should be durable to stand frequent shaking on bad roads. Most importantly, you need to ensure that it does not scratch the phone.